EH1BS9712E00 Specifications |
|
Switching Capacity |
8.64 Tbit/s; 18.56 Tbit/s |
Packet Forwarding Rates |
3,840 Mpps/6,480 Mpps |
Service Slots |
12 |
Wireless Network Management |
Native AC |
AP access control, AP region management, and AP profile management |
|
Radio profile management, uniform static configuration, and centralized dynamic management |
|
Basic WLAN services, QoS, security, and user management |
|
User Management |
Unified user management |
802.1x, MAC address, and Portal authentication |
|
Traffic- and time-based accounting |
|
User authorization based on user groups, domains, and time ranges |
|
iPCA Quality Awareness |
Marking real service packets to obtain real-time count of dropped packets and packet loss ratio |
Counting number of dropped packets and packet loss ratio on devices and L2/L3 networks |
|
SVF Virtualization |
Virtualizing Access Switches (ASs) and APs into one logical device to simplify management and maintenance |
Two layers of ASs allowed in an SVF system |
|
Third-party devices allowed between SVF parent and clients |
|
VLAN |
Access, trunk, and hybrid interfaces supported |
Default VLAN |
|
VLAN switching |
|
QinQ and selective QinQ |
|
MAC address-based VLAN assignment |
|
MAC Address |
Automatic learning and aging of MAC addresses |
Static, dynamic, and blackhole MAC address entries |
|
Packet filtering based on source MAC addresses |
|
MAC address limiting based on ports and VLANs |
|
STP/ERPS |
STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) |
BPDU protection, root protection, and loop protection |
|
BPDU tunnel |
|
ERPS (G.8032) |
|
IP Routing |
IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS |
IPv6 dynamic routing protocols, such as, RIPng, OSPFv3, ISISv6, and BGP4+ |
|
Multicast |
IGMP v1/v2/v3, IGMP v1/v2/v3 snooping |
PIM-SM, PIM-DM, PIM-SSM |
|
MSDP, MBGP |
|
Fast leave |
|
Multicast traffic control |
|
Multicast querier |
|
Multicast protocol packet suppression |
|
Multicast CAC |
|
Multicast ACL |
|
MPLS |
MPLS functions |
MPLS OAM |
|
MPLS TE |
|
Supports MPLS VPN/VLL/VPLS |
|
Reliability |
LACP and E-Trunk |
VRRP and BFD for VRRP |
|
BFD for BGP/IS-IS/OSPF/static route |
|
NSR, NSF, and GR for BGP/IS-IS/OSPF/LDP |
|
TE FRR and IP FRR |
|
Ethernet OAM (IEEE 802.3ah and 802.1ag) (hardware-based) |
|
HSR |
|
ITU-Y.1731 |
|
DLDP |
|
QoS |
Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority |
Actions of ACL, CAR, re-mark, and schedule |
|
Queue scheduling algorithms, such as SP, WRR, DRR, SP + WRR, and SP + DRR |
|
Congestion avoidance mechanisms, such as WRED and tail drop |
|
H-QoS |
|
Traffic shaping |
|
Network Synchronization |
Ethernet synchronization |
1588v2 |
|
Configuration and Maintenance |
Console, Telnet, and SSH login |
Network management protocols, such as SNMP v1/v2/v3 |
|
File uploading and downloading using FTP and TFTP |
|
BootROM upgrade and remote upgrade |
|
Hot patches |
|
User operation logs |
|
Security and Management |
802.1x authentication and portal authentication |
MACsec |
|
NAC |
|
RADIUS and HWTACACS authentication for login users |
|
Command line authority control based on user levels, preventing unauthorized users from using commands |
|
Defense against DoS attacks, TCP SYN Flood attacks, UDP Flood attacks, broadcast storms, and heavy traffic attacks |
|
1K CPU queues |
|
Ping and traceroute functions based on ICMP packets |
|
Supports remote network monitoring |
|
Value-added Services |
Firewall |
NAT |
|
NetStream |
|
IPSec |
|
Load balancing |
|
Wireless AC |
|
IPS |
|
Interoperability |
Interoperable with VBST (compatible with PVST/PVST+/RPVST) |
Interoperable with LNP (similar to DTP) |
|
Interoperable with VCMP (similar to VTP) |
|
Energy Saving |
Supports IEEE 802.3az: Energy Efficient Ethernet (EEE) |
Dimensions (H x W x D) |
663.95 mm x 442 mm x 489 mm, 15U |
Chassis Weight (empty) |
37 kg |
Operating Voltage |
DC: –40V to –72V |
Equipment Power Supply Capability |
6,600W |
We promise that our products are original and genuine only. Brand-new products will be brand new and sealed to ensure no malfunctions, and second-hand products will undergo strict testing before shipment.
We offer a 1-year warranty for brand-new products and a 90-day warranty for second-hand products. During the warranty period, if the equipment you purchase has any operational defects, we will replace it for you (the warranty does not cover faults caused by human damage and improper use).
Once the product malfunctions, please notify us as soon as possible, and we will appreciate your detailed description or photos.
The warranty period is calculated from the date of receipt of the goods. For any issues or inquiries regarding your purchase, please feel free to contact us via WhatsApp (+86 152 7186 6615) or Skype/Email: sales@infdevice.com