EH1Z06EACC00

EH1Z06EACC00 Specification

Series

Huawei S9706 Switch

Bundle

Huawei S9706 Basic Engine AC Bundle (Including Assembly Chassis*1, SRUC Main Board*2, 2200W AC Power*2, 48-Port 10/100/1000BASE-T Interface Card(X1E,RJ45)*1, Basic Software*1)

Switching capacity

6.72 Tbit/s; 14.72 Tbit/s

Packet forwarding rate

2,880 Mpps/5,040 Mpps

Service slots

6

Wireless network management

Native AC

AP access control, AP region management, and AP profile management

Radio profile management, uniform static configuration, and centralized dynamic

management

Basic WLAN services, QoS, security, and user management

User management

unified user management

802.1x, MAC address, and Portal authentication

Traffic- and time-based accounting

User authorization based on user groups, domains, and time ranges

iPCA quality awareness

Marking real service packets to obtain real-time count of dropped packets and

packet loss ratio

Counting number of dropped packets and packet loss ratio on devices and L2/L3

networks

SVF 2.0 virtualization

Virtualizing access switches (ASs) and APs into one logical device to simplify

management and maintenance

Two layers of ASs allowed in an SVF system

Third-party devices allowed between SVF parent and clients

VLAN

Supports adding access, trunk, and hybrid interfaces to VLANs

Supports the default VLAN

Supports VLAN switching

Supports QinQ and selective QinQ

Supports MAC address-based VLAN assignment

MAC address

Supports automatic learning and aging of MA C addresses

Supports static, dynamic, and blackhole MAC address entries

Supports packet filtering based on sour ce MAC addresses

Supports MAC address limiting based on ports and VL ANs

STP/ERPS

Supports STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

Supports BPDU protection, root protection, and loop protection

Supports BPDU tunnel

ERPS (G.8032)

IP routing

Supports IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS

Supports IPv6 dynamic routing protocols, such as, RIPng, OSPFv3, ISISv6, and

BGP4+

Multicast

Supports IGMP v1/v2/v3, IGMPv1/v2/v3 snooping

Supports PIM-SM, PIM-DM, PIM-SSM

Supports MSDP, MBGP

Supports prompt leave

Supports multicast traffic control

Supports multicast querier

Supports suppression on multicast packets

Supports multicast CAC

Supports multicast ACL

MPLS

Supports basic MPLS functions

Supports MPLS OAM

Supports MPLS TE

Supports MPLS VPN/VLL/VPLS

Reliability

Supports LACP and E-Trunk

Supports VRRP and BFD for VRRP

Supports BFD for BGP/IS-IS/OSPF/static route

NSR, NSF, and GR for BGP/IS-IS/OSPF/LDP

Supports TE FRR and IP FRR

Supports Ethernet OAM (IEEE 802.3ah and 802.1ag) (Hardware level)

HSR

Supports ITU-Y.1731

Supports DLDP

QoS

Supports traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4

protocols, and 802.1p priority

Supports actions of ACL, CAR, re-mark, and schedule

Supports queue scheduling algorithms, such as SP, WRR, DRR, SP+WRR, and

SP+DRR

Supports congestion avoidance mechanisms, such as WRED and tail drop

Supports H-QoS

Supports traffic shaping

Network synchronization

Ethernet synchronization

1588v2

Dimensions (H x W x D in mm)

441.7 mm x 442 mm x 489 mm, 10U

Chassis weight(empty)

29 kg

Operating Voltage

DC: –40V to –72V

AC: 90V to 290V

Power supply capability of the equipment

4,400W