S5730-68C-SI-AC Specification |
|
Fixed Ports |
48 x 10/100/1,000 Base-T, 4 x 10 Gig SFP+ |
MAC Address Table |
32K MAC |
Dimensions (W x D x H) |
442 mm x 420 mm x 44.4 mm |
Slot |
One extended slot that supports an interface card: 4 x 40 GE QSFP+ interface card |
Forwarding performance |
240 Mpps |
Switching capacity |
680 Gbit/s |
Power Supply |
Dual pluggable AC or DC power supplies, one 150W AC power supply equipped by default |
Input Voltage |
AC: Rated AC voltage: 100V to 240V; 50/60 Hz Max AC voltage: 90V to 264V; 47 Hz to 63 Hz |
DC: Rated DC power: -48V to -60V Max DC voltage: -36V to -72V |
|
Maximum Power Consumption |
Without card: 65. 4W |
Typical Power Consumption (without PD) |
Without card: 42.3W |
Operating Temperature |
0m to 1,800m altitude: 0°C to 45°C (long-term); -5°C to 50°C (short-term) |
Relative Humidity |
5% to 95% (non-condensing) |
Heat Dissipation |
Heat dissipation using fans supporting intelligent speed adjustment |
Surge Protection |
Surge protection capability of service ports: 7 kV |
MAC Address Table |
IEEE 802.1d compliance |
32K MAC address entries |
|
MAC address learning and aging |
|
Static, dynamic, and blackhole MAC address entries |
|
Packet filtering based on source MAC addresses |
|
VLAN |
4094 VLANs |
Guest VLAN and voice VLAN |
|
GVRP |
|
MUX VLAN |
|
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports |
|
1:1 and N:1 VLAN mapping |
|
Reliability |
RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover |
|
SEP |
|
STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) |
|
ERPS (G.8032) |
|
BPDU protection, root protection, and loop protection |
|
IP Routing |
Static route, RIPv1/v2, RIPng, OSPF, OSPFv3, ECMP, IS-IS, IS-ISv6, BGP, BGP4+, VRRP, and VRRP6 |
Multicast |
PIM DM, PIM SM, and PIM SSM |
IGMP v1/v2/v3 and IGMP v1/v2/v3 snooping and IGMP fast leave |
|
MLD v1/v2 and MLD v1/v2 snooping |
|
Multicast forwarding in a VLAN and multicast replication between VLANs |
|
Multicast load balancing among member ports of a trunk |
|
Controllable multicast |
|
Port-based multicast traffic statistics |
|
IPv6 Features |
Neighbor Discovery (ND) |
Path MTU (PMTU) |
|
IPv6 ping, IPv6 tracert, and IPv6 Telnet |
|
6to4 tunnel, ISATAP tunnel, and manually configured tunnel |
|
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type |
|
QoS/ACL |
Rate limiting on packets sent and received by a port |
Packet redirection |
|
Port-based traffic policing and two-rate three-color CAR |
|
Eight queues on each port |
|
WRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithms |
|
Re-marking of the 802.1p priority and DSCP priority |
|
Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID |
|
Rate limiting in each queue and traffic shaping on ports |
|
Security |
Hierarchical user management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense |
|
Binding of the IP address, MAC address, port number, and VLAN ID |
|
Port isolation, port security, and sticky MAC |
|
MFF |
|
Blackhole MAC address entries |
|
Limit on the number of learned MAC addresses |
|
IEEE 802.1x authentication and limit on the number of users on a port |
|
AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC |
|
SSH v2.0 |
|
HTTPS |
|
CPU defense |
|
Blacklist and whitelist |
|
IEEE 802.1x authentication, MAC address authentication, and Portal authentication |
|
DHCPv4/v6 client/relay/server/snooping |
|
Attack source tracing and punishment for IPv6 packets such as ND, DHCPv6, and MLD packets |
|
SVF |
Plug-and-play SVF client |
Automatic software and patch loading to clients |
|
One-click and automatic delivery of service configurations |
|
Independent client running |
|
OAM |
Software OAM |
EFM OAM |
|
CFM OAM |
|
Y.1731 performance test |
|
Management and Maintenance |
iStack (using service ports as stack ports) |
Virtual cable test |
|
SNMP v1/v2c/v3 |
|
RMON |
|
Web-based NMS |
|
System logs and alarms of different levels |
|
802.3az EEE |
|
sFlow |
|
Intelligent O&M |
|
Interoperability |
Supports VBST (compatible with PVST/PVST+/RPVST) |
Supports LNP (similar to DTP) |
|
Supports VCMP (similar to VTP) |
We promise that our products are original and genuine only. Brand-new products will be brand new and sealed to ensure no malfunctions, and second-hand products will undergo strict testing before shipment.
We offer a 1-year warranty for brand-new products and a 90-day warranty for second-hand products. During the warranty period, if the equipment you purchase has any operational defects, we will replace it for you (the warranty does not cover faults caused by human damage and improper use).
Once the product malfunctions, please notify us as soon as possible, and we will appreciate your detailed description or photos.
The warranty period is calculated from the date of receipt of the goods. For any issues or inquiries regarding your purchase, please feel free to contact us via WhatsApp (+86 152 7186 6615) or Skype/Email: sales@infdevice.com