S5720-52P-EI-AC Specification |
|
Fixed ports |
S5720-52P-EI-AC: 48×10/100/1000Base-T, 4 Gig SFP, 2 QSFP+ |
Extended slot |
NA |
MAC address table |
IEEE 802.1d 64K MAC address entries MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses |
VLAN |
4K VLANs Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN mapping VLAN-based transparent transmission of protocol packets |
Jumbo frame |
12K |
Ethernet loop protection |
RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover SEP ERPS (G.8032) STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection BPDU tunnel |
MPLS |
MPLS L3VPN MPLS L2VPN (VPWS/VPLS) MPLS-TE MPLS QoS |
IP routing |
Static routing, RIPv1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, and policy-based routing |
IPv6 features |
Neighbor Discovery (ND) Path MTU (PMTU) IPv6 ping, IPv6 tracert, and IPv6 Telnet 6to4 tunnel, ISATAP tunnel, and manually configur ed tunnel ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or pr otocol type MLD v1/v2 snooping |
Multicast |
IGMP v1/v2/v3 snooping and IGMP fast leave Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk Controllable multicast Port-based multicast traffic statistics IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM MSDP MVPN |
QoS/ACL |
Rate limiting on packets sent and received by a port Packet redirection Port-based traffic policing and two-rate three-color CAR Eight queues on each port WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms WRED Re-marking of the 802.1p priority and DSCP priority Packet filtering at Layer 2 to Layer 4, filtering out invalid fr ames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID Rate limiting in each queue and traffic shaping on ports 1:1, N:1, N:4 port mirroring |
Security |
Hierarchical user management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, port number, and VLAN ID Port isolation, port security, and sticky MAC MFF Blackhole MAC address entries Limit on the number of learned MA C addresses IEEE 802.1x authentication and limit on the number of users on a port AAA authentication, RADIUS authentication, and HWTACACS authentication NAC SSH v2.0 HTTPS CPU defense Blacklist and whitelist Attack source tracing and punishment for IPv6 packets such as ND, DHCPv6, and M LD packets |
Reliability |
Ethernet OAM (IEEE 802.3ah and IEEE 802.1ag) ITU-Y.1731 BFD for BGP, BFD for IS-IS, BFD for OSPF, BFD for static route VRRP4, VRRP6 |
Super Virtual Fabric (SVF) |
Plug-and-play SVF client Automatic software and patch loading to clients One-click and automatic delivery of service configurations Independent client running |
TWAMP |
Two-way IP link performance measurement Measurement on two-way packet delay, one-way packet loss rate, and one-way packet jitter |
Management and Maintenance |
iStack Virtual cable test SNMP v1/v2c/v3 RMON/RMON2 Web-based NMS System logs and alarms of different levels sFlow 802.3az Energy Efficient Ethernet (EEE) |
Interoperability |
VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and RPVST Link-type Negotiation Protocol (LNP), similar to DTP VLAN Central Management Protocol (VCMP), similar to VTP |
Operating environment |
Operating temperature: 0-1800 m altitude: 0oC to 45oC 1800-5000 m altitude: The operating temperature reduces by 1oC every time the altitude increases by 220 m. Relative humidity: 5% to 95% (non-condensing) |
Input voltage |
AC: Rated voltage range: 100 V to 240 V A C, 50 Hz to 60 Hz Maximum voltage range: 90 V to 264 V A C, 47 Hz to 63 Hz DC: Rated voltage range: –48 V to –60 V, DC Maximum voltage range: –36 V to –72 V, DC |
Dimensions (W x D x H, mm) |
442×220×43.6 |
Front power input |
S5720-52P-EI-AC: No |
Typical power consumption |
S5720-52P-EI-AC: 51.1 W |
We promise that our products are original and genuine only. Brand-new products will be brand new and sealed to ensure no malfunctions, and second-hand products will undergo strict testing before shipment.
We offer a 1-year warranty for brand-new products and a 90-day warranty for second-hand products. During the warranty period, if the equipment you purchase has any operational defects, we will replace it for you (the warranty does not cover faults caused by human damage and improper use).
Once the product malfunctions, please notify us as soon as possible, and we will appreciate your detailed description or photos.
The warranty period is calculated from the date of receipt of the goods. For any issues or inquiries regarding your purchase, please feel free to contact us via WhatsApp (+86 152 7186 6615) or Skype/Email: sales@infdevice.com